北京冠测精电仪器设备有限公司

首页>产品展示>热物理性能检测设备

英文版热膨胀系数测试仪

采购热度:1412 发布时间:2014/5/26 10:52:27

型号:GCPZY-100

价格: 777 产地:中国大陆

简单介绍:该装置用于测试橡胶,塑料等高分子材料在一定温差下测量长度的变化值,由此可计算其一定温度下的平均膨胀系数,参照国标:GB1036-2006测试方法。

详细介绍

GCPZY-100塑料高分子材料膨胀系数测试仪

GCPZY-100 plastic polymer material expansion coefficient testing apparatus

产品概述:

Product overview:

该装置用于测试橡胶,塑料等高分子材料在一定温差下测量长度的变化值,由此可计算其一定温度下的平均膨胀系数,参照国标:GB1036-2006测试方法。

The device is used for test of rubber, plastic and other polymer material measuring length changes in a certain temperature difference value, which can calculate the average expansion coefficient, the temperature of the reference standard test method for: GB1036-2006.

主要技术参数:

Main technical parameters:

1 炉温:室温-1000℃。

The 1 highest temperature: room temperature -1000.

2 升温速度,实验过程控制参数,含PID参数。

2 the heating speed, the experimental process control parameters, including PID parameters.

⑴由智能仪表实现全过程任意调节、设置、锁定。操作见仪表说明书。

by the intelligent instrument to realize the whole process of arbitrary regulation, setting, lock. See the manual operation instrument.

⑵提供由上位机(计算机)接口,可实现在线检测。

The provided by the hostcomputer interface, can realize online detection.

3 电源电压:220V±10﹪,50HZ

The 3 power supply voltage: 220V ± 10%, 50HZ

4 恒温水槽温度可达100度,加热功耗≤2KW

4 constant temperature water tank temperature can reach 100 degrees, the heating power ≤ 2KW

5 膨胀值测量范围与误差:0--5㎜±0.1%

The 5 expansion value measurement range and error: ± 0.1% 0--5 mm

6 控温精度:±0.1℃ 温度记录值误差≤±0.5﹪

Temperature control accuracy: 6 ± 0.1 ℃ temperature record value error less than ± 0.5%

7 测量膨胀值分辨率:1um

7 measuring the expansion value resolution: 1um

8.测量容积1.8升,不锈钢真空保温。可装低温液体进行低于环境温度的线膨胀系数测试试验。

8 measurement of the volume of 1.8 litres, stainless steel vacuum insulation. Can be installed in cryogenic liquid is lower than the environment temperature linear expansion coefficient test test.

9.测试容积温度检测:最小分辨:0.1℃

The 9 test volume temperature detection: the minimum resolution: 0.1 ℃

10.测试架石英管,以及石英外管,石英活塞顶杆

The 10 test frame quartz tube, quartz tube, quartz rod, piston top

11.样品大小:50长*20宽*3—6厚(mm)

11 sample size: 50 maximum length *20 width *3 6 thicknessmm

12.测试系统满足标准:GB/T 20673-2006,GB1036-89 塑料线膨胀系数测试定方法的技术要求和精度要求。

12 test system meet the standards: GB/T 20673-2006, GB1036-89 plastic linear thermal expansion coefficient of the technical requirements of test method and the precision requirement.

13.采用石英标样标定仪器系统

13 using quartz calibration instrument system standard sample

产品配置:

Product configuration:

测试主机一台,

A test mainframe,

低温水槽一台;

Cryogenic tank a;

测试软件一套,

A set of test software,

计算机一台,

A computer,

标样一个

Standard sample a

 

更新时间:2021/3/29 13:15:36

标签:江苏热膨胀系数仪   

9

阿仪网wap.app17.com

在线询价

电话咨询

我要询价X

产品名称:

您的称呼:

您的电话:

您的单位:

您的要求:

  验证码:

提交